raj2227
10-17 03:12 PM
1
wallpaper irthday cake clip art free.
bmoni
01-28 06:28 PM
First thing, call one of the high powered attorneys discuss with them what options you have.
I think there is a recent court ruling that will favor you in fighting the USCIS decisions.
This is the first time we're (I'm) seeing such a denial notice related to the recent memo. So who ever thinks this is just a memo or USCIS reiterating existing rules. Rethink your stand. I'm sure more people will wake up soon.
Keep up the hope. Don't wait if possible try to apply for another new H1B.
Thanks for posting the denial notice. I feel your pain. Again don't lose your hope keep up the fight. If you hear any updates please do post them.
I think there is a recent court ruling that will favor you in fighting the USCIS decisions.
This is the first time we're (I'm) seeing such a denial notice related to the recent memo. So who ever thinks this is just a memo or USCIS reiterating existing rules. Rethink your stand. I'm sure more people will wake up soon.
Keep up the hope. Don't wait if possible try to apply for another new H1B.
Thanks for posting the denial notice. I feel your pain. Again don't lose your hope keep up the fight. If you hear any updates please do post them.
obviously
08-04 11:45 AM
Thanks for the 2 quick responses... albeit, opposite in recommendation :)
1. No need to file new I-485
- Has anyone done this?
- Any risks that we should think about?
2. File new I-485
- Has anyone done this?
- Apart from the additional cost and document preparation time, is there any other downside?
Funny thing is before this happened, I ran into a lot of threads suggesting interfiling was easy. Now that it is at the doorstep, there are quite a few questions and some confusion. I am thinking of getting a 20 min appt with the M law firm.
Appreciate any responses or assistance!!!!
Cheers!
I found the following info from Ron G's website, not sure that most of it applies in this case... since both I-140 have been approved and the later one under EB2 does reference the EB3 priority date.
When an I-140 is approved, your priority date is perfected. If the labor substitution I-140 has been approved, then you own that priority date forever. If you have to file the new I-140 before the old one is approved, you can later show the CIS the two priority dates (from the petition approval notices) and pick the better preference category and earlier priority date - even though they may be from different petitions. In this case, "later" means after the I-140 with the earlier priority date is approved. All you need to do is write to the CIS and enclose copies of the relevant approval notices and the I-485 receipt notice. What you should do is make sure that they consolidate both I-140 petitions into the same file. You don't need to file a new I-485, all you need to do in interfile your second I-140.
You should make a copy of the approval notice for the first I-140, a copy of the receipt notice for the second I-140, and the write a letter to the CIS, asking them to give your second I-140 the priority date established by the first. You can cite the regulatory authority found HERE. (Refer text below) Send it to the correspondence address shown in the lower left portion of the receipt notice.
You can upgrade your preference classification while staying with the same employer, but you will need a new job. Attempting to use the same job with different minimum qualifications will call into question the legitimacy of the original labor certification. If the second I-140 is denied, it will have no effect on the first. There shouldn't be any difficulty porting in an LC substitution situation.
The CIS regulations at 8 CFR 204.5(e) provides for the retention of a previously established priority date under the circumstances described below:
(e) Retention of section 203(b)(1), (2), or (3) priority date. --
A petition approved on behalf of an alien under sections 203(b)(1), (2), or (3) of the Act accords the alien the priority date of the approved petition for any subsequently filed petition for any classification under sections 203(b)(1), (2), or (3) of the Act for which the alien may qualify. In the event that the alien is the beneficiary of multiple petitions under sections 203(b)(1), (2), or (3) of the Act, the alien shall be entitled to the earliest priority date. A petition revoked under sections 204(e) or 205 of the Act will not confer a priority date, nor will any priority date be established as a result of a denied petition. A priority date is not transferable to another alien.
1. No need to file new I-485
- Has anyone done this?
- Any risks that we should think about?
2. File new I-485
- Has anyone done this?
- Apart from the additional cost and document preparation time, is there any other downside?
Funny thing is before this happened, I ran into a lot of threads suggesting interfiling was easy. Now that it is at the doorstep, there are quite a few questions and some confusion. I am thinking of getting a 20 min appt with the M law firm.
Appreciate any responses or assistance!!!!
Cheers!
I found the following info from Ron G's website, not sure that most of it applies in this case... since both I-140 have been approved and the later one under EB2 does reference the EB3 priority date.
When an I-140 is approved, your priority date is perfected. If the labor substitution I-140 has been approved, then you own that priority date forever. If you have to file the new I-140 before the old one is approved, you can later show the CIS the two priority dates (from the petition approval notices) and pick the better preference category and earlier priority date - even though they may be from different petitions. In this case, "later" means after the I-140 with the earlier priority date is approved. All you need to do is write to the CIS and enclose copies of the relevant approval notices and the I-485 receipt notice. What you should do is make sure that they consolidate both I-140 petitions into the same file. You don't need to file a new I-485, all you need to do in interfile your second I-140.
You should make a copy of the approval notice for the first I-140, a copy of the receipt notice for the second I-140, and the write a letter to the CIS, asking them to give your second I-140 the priority date established by the first. You can cite the regulatory authority found HERE. (Refer text below) Send it to the correspondence address shown in the lower left portion of the receipt notice.
You can upgrade your preference classification while staying with the same employer, but you will need a new job. Attempting to use the same job with different minimum qualifications will call into question the legitimacy of the original labor certification. If the second I-140 is denied, it will have no effect on the first. There shouldn't be any difficulty porting in an LC substitution situation.
The CIS regulations at 8 CFR 204.5(e) provides for the retention of a previously established priority date under the circumstances described below:
(e) Retention of section 203(b)(1), (2), or (3) priority date. --
A petition approved on behalf of an alien under sections 203(b)(1), (2), or (3) of the Act accords the alien the priority date of the approved petition for any subsequently filed petition for any classification under sections 203(b)(1), (2), or (3) of the Act for which the alien may qualify. In the event that the alien is the beneficiary of multiple petitions under sections 203(b)(1), (2), or (3) of the Act, the alien shall be entitled to the earliest priority date. A petition revoked under sections 204(e) or 205 of the Act will not confer a priority date, nor will any priority date be established as a result of a denied petition. A priority date is not transferable to another alien.
2011 Birthday Cake Images
sanju_dba
09-14 04:30 PM
Sorry I should have been more clear.
I never worked for Company B , I am still with Company A. Company B just got the LCA approved (and they claim that they have filed for the H1b transfer). The start date with Company B as per the offer letter is 1 week from now. I informed them that I cannot join them 1 week before.
I have same set of copies (offer letter) that I signed them, I couldn't find anything which says anything about $3000. All it says "At Will" in nature. All of a sudden these guys are coming with a 3 months story which I am not seeing and there is no evidence.
I am afraid if they will insert a paper or something like that with in the offer letter, don't know..these guys will do anything.
I got it.
I think it will take like 1month atleast to get LCA. After LCA approval they can apply for H1 .
At this stage they might have spend money on LCA only + for attorney fee if any.
Attorneys may charge the full fee upfront so they may have incurred full legal fee , minus H1 fees.
H1 Govt fee is payid by employer so they cannot ask that . but if they paid for attorney , then they may ask for it.
Your concern about a additional insert into the contract papers. Are the contract pages numbered? if so you are safe. if not :rolleyes:
I never worked for Company B , I am still with Company A. Company B just got the LCA approved (and they claim that they have filed for the H1b transfer). The start date with Company B as per the offer letter is 1 week from now. I informed them that I cannot join them 1 week before.
I have same set of copies (offer letter) that I signed them, I couldn't find anything which says anything about $3000. All it says "At Will" in nature. All of a sudden these guys are coming with a 3 months story which I am not seeing and there is no evidence.
I am afraid if they will insert a paper or something like that with in the offer letter, don't know..these guys will do anything.
I got it.
I think it will take like 1month atleast to get LCA. After LCA approval they can apply for H1 .
At this stage they might have spend money on LCA only + for attorney fee if any.
Attorneys may charge the full fee upfront so they may have incurred full legal fee , minus H1 fees.
H1 Govt fee is payid by employer so they cannot ask that . but if they paid for attorney , then they may ask for it.
Your concern about a additional insert into the contract papers. Are the contract pages numbered? if so you are safe. if not :rolleyes:
more...
LostInGCProcess
09-18 05:31 PM
LostInGCProcess, his I140 is not approve, how come he can use his EAD ?
AOS can only be use after his I140 is approved.
Thx
That is not true. Once you have EAD on hand, you can chose to work using your EAD. I-140 pending or approval has nothing to do with working on EAD. The risk is, if his I-140 is not approved, then it would automatically trigger a NOID for I-485 and his EAD becomes invalid....thats the risk factor. But one can work if one has EAD.
AOS can only be use after his I140 is approved.
Thx
That is not true. Once you have EAD on hand, you can chose to work using your EAD. I-140 pending or approval has nothing to do with working on EAD. The risk is, if his I-140 is not approved, then it would automatically trigger a NOID for I-485 and his EAD becomes invalid....thats the risk factor. But one can work if one has EAD.
fromnaija
07-20 05:32 PM
Thank you!
http://www.insvisa.com/faq/department_state.htm#15
not an authoritative source but if both of you are in USA right now then you need to bring the kid now before GC approval on dependent visa
http://www.insvisa.com/faq/department_state.htm#15
not an authoritative source but if both of you are in USA right now then you need to bring the kid now before GC approval on dependent visa
more...
haifromsk@yahoo.com
02-08 11:51 PM
GUYS please stop advicing her. Let her consult an attorney. Please do not lead
her in any direction. She need to contact an immigration and possibly civil and criminal attorney. An immigration attorney might lead her in the right direction. Super moderator already suggested that so please listen to what he said. Estrela please don't waste your time looking for answers in this thread. Answers given by common people can be incorrect and misleading. Immigration attorney is the way to go.
Good luck and god bless you
As gsc999 said peoples here mostly know about "Employment Based GC" not much about "Family Based GC" .... Still few questions if we can guide you to the right place...
a) What is your current Immigration Status ?
b) Do you have SSN ?
c) Forget about he goes to Jail/not is it impossible to get your "Marriage Certified" or at least put the Application before March 31st ? You have almost 51 days ...Based on that a lawyer can guide you but if you dont have a Marriage Certficate no one can really help... You know !
d) Lets the Justice system decide he goes to Jail or not but if unfortunately he is convicted and goes to Jail for 18 months do you want to live/continue your marriage with him after he comes out ?
e) Based on Marriage with US Citizen they give you "conditional GC" - and they would verify after 2-3 years if your marriage is a "Bonafide Marriage" etc... and then only give you a "unconditional GC"
That's why you will see those fake "immigration marriage" start giving problem after 2-3 years and end up in mutual Divorce. Be cautious about converting you GC to a regular "unconditional GC" .
Good Luck !
her in any direction. She need to contact an immigration and possibly civil and criminal attorney. An immigration attorney might lead her in the right direction. Super moderator already suggested that so please listen to what he said. Estrela please don't waste your time looking for answers in this thread. Answers given by common people can be incorrect and misleading. Immigration attorney is the way to go.
Good luck and god bless you
As gsc999 said peoples here mostly know about "Employment Based GC" not much about "Family Based GC" .... Still few questions if we can guide you to the right place...
a) What is your current Immigration Status ?
b) Do you have SSN ?
c) Forget about he goes to Jail/not is it impossible to get your "Marriage Certified" or at least put the Application before March 31st ? You have almost 51 days ...Based on that a lawyer can guide you but if you dont have a Marriage Certficate no one can really help... You know !
d) Lets the Justice system decide he goes to Jail or not but if unfortunately he is convicted and goes to Jail for 18 months do you want to live/continue your marriage with him after he comes out ?
e) Based on Marriage with US Citizen they give you "conditional GC" - and they would verify after 2-3 years if your marriage is a "Bonafide Marriage" etc... and then only give you a "unconditional GC"
That's why you will see those fake "immigration marriage" start giving problem after 2-3 years and end up in mutual Divorce. Be cautious about converting you GC to a regular "unconditional GC" .
Good Luck !
2010 irthday cake cartoon. wrlsmarc
CADude
11-08 01:05 PM
NO,
Family based has 1.3 Million pending applications.
AOS has only 655K. So be happy. :D
It appears that this 655K includes family based I485 cases too who are in a different queue.
Family based has 1.3 Million pending applications.
AOS has only 655K. So be happy. :D
It appears that this 655K includes family based I485 cases too who are in a different queue.
more...
h1techSlave
09-27 09:59 AM
The article says: "After all, if the legal process was more efficient and less daunting, perhaps the illegal immigration problems wouldn't be quite so bad."
I say, it is not perhaps, it is a given. When there is a legal remedy for any issue (not just immigration), then 9 out of 10 people would not go the illegal way.
I say, it is not perhaps, it is a given. When there is a legal remedy for any issue (not just immigration), then 9 out of 10 people would not go the illegal way.
hair Birthday Cake Clipart
newuser
08-17 12:10 PM
For renewal they did not even ask me for any documentation. Renewed online, went to DMV and got it for 4 years.
I agree with ashkam. If you renew online, you can get it for 4 years. But if you go in person to DMV, they will issue based in EAD.
I agree with ashkam. If you renew online, you can get it for 4 years. But if you go in person to DMV, they will issue based in EAD.
more...
shaikhshehzadali
07-16 07:16 PM
Lets not count the chickens before they are hatched. Its entirely plausible that if anything favourable comes up, its due to combined efforts. Lets not fight out yet, as if we havent seen anything concrete yet.
cheers
It's pretty strange..I really don't understand...why the entire credit is either being given to IV...or for that matter to AILA/AILF....Everyone has contributed....
People about to file I-485 have spread the word to everyone abt the injustice done to them...whereas each organization has done its own thing...
I won't blame or taunt AILA/AILF....because the idea of class lawsuit itself would have scared a lot of people in USCIS.....that also coming from legal organization...And filing a lawsuit takes time...there r lot of things to be considered..
cheers
It's pretty strange..I really don't understand...why the entire credit is either being given to IV...or for that matter to AILA/AILF....Everyone has contributed....
People about to file I-485 have spread the word to everyone abt the injustice done to them...whereas each organization has done its own thing...
I won't blame or taunt AILA/AILF....because the idea of class lawsuit itself would have scared a lot of people in USCIS.....that also coming from legal organization...And filing a lawsuit takes time...there r lot of things to be considered..
hot irthday cake clip art
feblc2002
02-03 04:45 PM
Congratulaions ivar. I guess your dates became current couple of months ago. It took so long for them to approve it ? Could you please give some details on when you got approval notification?
more...
house Cake Clipart #231543: Pink
jeny
08-06 03:41 AM
Jeny: I believe you are referring to an interview for Consular Processing; not Adjustment of Status, correct?
Thanks,
Jayant
Yes Jayant it is Consular Process. Today i send a mail to them, hope they will replay.
Thanks
Thanks,
Jayant
Yes Jayant it is Consular Process. Today i send a mail to them, hope they will replay.
Thanks
tattoo Wedding Cake clip art
ibbu_arif
11-16 10:27 AM
Hello Gurus,
I have been searching various posts and found quite answers to quite a few questions I had in mind, but as usual I am left out with few more queries :)
Following is my current Status
Pending I-485 Application, AP valid till Dec 6th 2008 and EAD Valid till Oct 2010.
Already applied for AP extension for me and my wife on Oct 10 2008 and awaiting for Approval.
I had travelled once on my AP in April 2008 for a week to Visit my sick mother... I understand that this Puts me on parolee status. But Please NOTE that I am still with my H1B Status with my employer. Didn't use my EAD for I-9 forms.
After returning, my employer applied for my H1B extension for 3 years ( I already completed my 6 yrs of H1B). It is already approved and I have a Approved/Valid H1B document till May 30 2011.
From the info in some posts, I understood that this extension puts me back into H1B Status.
Now the actual question :
-------------------------
I had to Visit India in Jan 2009. I already booked my tickets for Jan4th (you know how it is , you always have to book earlier ), with an anticipation that I will get my AP extension Approved before that time. (I gave 3 months time for myself)
If I get my AP approved before I leave then NO Issues, I will again use my AP to re-enter USA in Feb 2009.
But let's assume I don't get it Approved before I leave.
a) Am I allowed to travel outside USA while my AP is Pending ?
b) If allowed, Can my AP get approved while I am outside US (i.e in India) ? Or will they Cancel my AP application?
c) I know I should get my H1B Visa stamping done while in India to re-enter on H1B Status. Do you see any problems that the consular officer/POE officer can create like
why did I leave the country while my AP application is Pending ?
Why are applying for H1B Visa while you could have used your AP?
I appreciate your detailed answers.
Thanks
I have been searching various posts and found quite answers to quite a few questions I had in mind, but as usual I am left out with few more queries :)
Following is my current Status
Pending I-485 Application, AP valid till Dec 6th 2008 and EAD Valid till Oct 2010.
Already applied for AP extension for me and my wife on Oct 10 2008 and awaiting for Approval.
I had travelled once on my AP in April 2008 for a week to Visit my sick mother... I understand that this Puts me on parolee status. But Please NOTE that I am still with my H1B Status with my employer. Didn't use my EAD for I-9 forms.
After returning, my employer applied for my H1B extension for 3 years ( I already completed my 6 yrs of H1B). It is already approved and I have a Approved/Valid H1B document till May 30 2011.
From the info in some posts, I understood that this extension puts me back into H1B Status.
Now the actual question :
-------------------------
I had to Visit India in Jan 2009. I already booked my tickets for Jan4th (you know how it is , you always have to book earlier ), with an anticipation that I will get my AP extension Approved before that time. (I gave 3 months time for myself)
If I get my AP approved before I leave then NO Issues, I will again use my AP to re-enter USA in Feb 2009.
But let's assume I don't get it Approved before I leave.
a) Am I allowed to travel outside USA while my AP is Pending ?
b) If allowed, Can my AP get approved while I am outside US (i.e in India) ? Or will they Cancel my AP application?
c) I know I should get my H1B Visa stamping done while in India to re-enter on H1B Status. Do you see any problems that the consular officer/POE officer can create like
why did I leave the country while my AP application is Pending ?
Why are applying for H1B Visa while you could have used your AP?
I appreciate your detailed answers.
Thanks
more...
pictures Vector Clip Art Picture of a
suryamanikanth
04-17 02:23 PM
OP already mentioned the change was expected in the NOC list [On-Demand occupation list of Alberta]. Nobody told it would be closed after April 15. Did you see all the postings here before blaming others?
hey dude there's nothing in the url u posted once go to the website and click the the pressure list url.that is the actual Noc codes that are active.Today morning when i spoke to the immigraton officer in alberta he was the one who told me ok.
hey dude there's nothing in the url u posted once go to the website and click the the pressure list url.that is the actual Noc codes that are active.Today morning when i spoke to the immigraton officer in alberta he was the one who told me ok.
dresses Birthday Cake Clip Art For
senthil
02-15 09:50 AM
why not - no one does things for free. if you talk to attorney, you know how much $$ you have to pay. most time ive seen members on form answer clean and quick based on their experiance, which is in-valuable.
$1 is just pennnies. not bad to start with at all
$1 is just pennnies. not bad to start with at all
more...
makeup Birthday Cake Clipart #97949:
krishnam70
07-18 12:34 PM
There's no need for you to be negative.
Obviously you have benefitted already from what's happened. Think about people who are stuck (just as you were up until recently) and want to 'try' to make things work for them too....
wish people were more understanding of others also. Why is it people forget what it was like for them when they were in same boat?
ps57002
There have been numerous threads in this forum about the utility of sending more flowers to USCIS, whitehouse, condi, Bush etc etc and there is no consenus on that. Now If you need to try to bring to attention the delays of the BEC try something innovative or if you feel flowers are the way to go
then go do it, but before doing that try to find out your audience, how many people are affected by this. In case of 485 retro there were thousands of people who were affected and so there was a tremendous response. Now while i do not deny that there might be same kind of numbers stuck in BEC you need to bring the issue in to focus and make a drive to bring in the believers.
The flower campaign started off as a small remark and some people believed it would work and just kept working on it and ultimately it 'may' have worked because of the organized activity that took place. Now if you believe it will work for BEC centers too go ahead with your plan( I am not sure IV will support it, initally the Gandhigiri did not have IV support too if i recall). If people believe it will work they will join the campaign. Publicise your efforts and you will see results.
go do it..
cheers
edit:
http://immigrationvoice.org/index.php?option=com_frontpage&Itemid=1
IV has recommendation to not use flowers going forward
BEC reduction is one of they key goals of IV going forward. so stay tight you should hear something soon
Obviously you have benefitted already from what's happened. Think about people who are stuck (just as you were up until recently) and want to 'try' to make things work for them too....
wish people were more understanding of others also. Why is it people forget what it was like for them when they were in same boat?
ps57002
There have been numerous threads in this forum about the utility of sending more flowers to USCIS, whitehouse, condi, Bush etc etc and there is no consenus on that. Now If you need to try to bring to attention the delays of the BEC try something innovative or if you feel flowers are the way to go
then go do it, but before doing that try to find out your audience, how many people are affected by this. In case of 485 retro there were thousands of people who were affected and so there was a tremendous response. Now while i do not deny that there might be same kind of numbers stuck in BEC you need to bring the issue in to focus and make a drive to bring in the believers.
The flower campaign started off as a small remark and some people believed it would work and just kept working on it and ultimately it 'may' have worked because of the organized activity that took place. Now if you believe it will work for BEC centers too go ahead with your plan( I am not sure IV will support it, initally the Gandhigiri did not have IV support too if i recall). If people believe it will work they will join the campaign. Publicise your efforts and you will see results.
go do it..
cheers
edit:
http://immigrationvoice.org/index.php?option=com_frontpage&Itemid=1
IV has recommendation to not use flowers going forward
BEC reduction is one of they key goals of IV going forward. so stay tight you should hear something soon
girlfriend 2010 Birthday Cake Clip Art
irfankhan25
04-06 04:33 AM
You can import PDF-compatible Adobe Illustrator files (.ai) directly into an open document in your Microsoft Expression Blend project.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
hairstyles Birthday Cake Clip Art Free
akhilmahajan
11-15 02:34 PM
Is there any possibility of organizing a statewide charity drive sponsored by IV state chapters during the holiday season. This is the season of giving. Why not organize it through IV state chapters. Proceeds can be donated to charities as suggested by donors. We can target
employers, congressmen, senators, relatives, friends....even anti immigrants will donate.
Anybody with prior experience of such fund raising, please comment. We also need to come up with a slogan for this campaign (It may be better if the slogan in itself is not related to immigration) . IV will just do a soft sell in this propaganda. This will increase IV name & also push respective state members to be active in their state chapters.
Comments?
The whole idea is to get people understand and above all accept the problem.
If people can accept the problem and come out willing to find out a solution, then anything can be done.
This is a good time to meet eh lawmakers as they will be coming back for the thanksgiving break. we can highlight our issue.
We can also help in setting up law maker meetings. Folks please contact your state chapters. People are waiting top help you, but if you dont decide to help yourself, then no one can help you.
Think about it.
GO IV GO. TOGTHER WE CAN.
employers, congressmen, senators, relatives, friends....even anti immigrants will donate.
Anybody with prior experience of such fund raising, please comment. We also need to come up with a slogan for this campaign (It may be better if the slogan in itself is not related to immigration) . IV will just do a soft sell in this propaganda. This will increase IV name & also push respective state members to be active in their state chapters.
Comments?
The whole idea is to get people understand and above all accept the problem.
If people can accept the problem and come out willing to find out a solution, then anything can be done.
This is a good time to meet eh lawmakers as they will be coming back for the thanksgiving break. we can highlight our issue.
We can also help in setting up law maker meetings. Folks please contact your state chapters. People are waiting top help you, but if you dont decide to help yourself, then no one can help you.
Think about it.
GO IV GO. TOGTHER WE CAN.
Ann Ruben
05-15 04:15 PM
I believe that in the original post, Keerthi indicated that he was in India.
gc_chahiye
11-09 02:43 AM
I think they are talking about the number of receipts that were issued in September, not the number of AOS filings.
oh ok, it makes sense then. thanks for clarifying that.
oh ok, it makes sense then. thanks for clarifying that.
No comments:
Post a Comment